CABLE DUCT
Reliable and flexible cable ducting
When it is a case of guaranteeing smooth operation of industrial and infrastructure systems, the main focus is on the planning of reliable and interference-free power supply and data transmission. This is because cable or line damage does not only result in high repair costs, but usually also involves expensive downtime.
With our supply channel made from hanit recycled plastic, we have developed a high-quality solution for reliable routing of cables and lines which guarantees long-term and reliable deployment, not only indoors but particularly in outdoor areas. Our hanit material is extremely robust, frost resistant and UV resistant, and also withstands many environmental influences. Laying underground is therefore also possible without problems in civil engineering projects. Our cable duct can also withstand a considerable amount of mechanical stress, and therefore guarantees long-term stability without deformation. The technical portfolio is rounded off by outstanding tensile strength.
Reliable protection for cables and signal lines
In addition to the high product quality, supply channels made from hanit recycled plastic have another decisive advantage, i.e. their light weight. They are just one third of the weight of comparable products made from concrete. This does not only make it possible to save a considerable amount of money with regard to transport, but also during installation, which can easily be carried out manually without the need for bulky lifting equipment. Laying in terrain that is difficult to access or cannot be driven on is therefore possible. The integrated plug-in system also makes assembly and disassembly and therefore re-use in different phases of construction possible. The top of the supply channel can be opened along its entire length, for easy insertion and removal of prefabricated cables and lines. This removes the need for tedious cable threading, and maintenance and monitoring of the lines is also very easy.
Our hanit cable duct has already made an impression in numerous projects in industrial and traffic construction because of the special combination of easy, low cost laying and outstanding product performance. It is available in two sizes and two different nominal widths as standard. We can make project-specific adaptations to the supply channel if necessary, so that individual size, nominal width or flexible routing requirements can be fulfilled in the best possible way, and your power cables, control cables and supply lines are provided with optimum protection.
YOUR ADVANTAGES AT A GLANCE
Material characteristics of hanit
Resistant to acids, alkalis and oils
Hydrophobic
UV-resistant
Fire class B2 (DIN 4102)
Density of approx. 0.93 g/cm3
Resistant to micro-organisms
SUPPLY CHANNEL MADE OF RECYCLED PLASTIC
Individual solutions made of hanit
Item No.: 6000738
Our hanit System products can be flexibly adapted to customer-specific requirements. Just get in touch – we’ll find the right solution together.
Our hanit System products can be flexibly adapted to customer-specific requirements. Just get in touch – we’ll find the right solution together.
REFERENCE PROJECT
Riyadh cable channels
Riyadh, Saudi Arabia's capital and biggest financial hub, lies on a desert plateau in the middle of the country. The booming economy of Riyadh has resulted in rapid growth of the city, and the current population of 6.5 million is expected to increase to 8.3 million by 2030. This is why the world’s biggest public local transport project has been implemented. Among other things, it includes six Metro lines extending over a total distance of 176 kilometres. Two of the lines will be constructed by Siemens Mobility as part of a consortium and equipped with Metro trains, electrification and signal and communication technology for driverless operation.
Our hanit recycled plastic was used on this large and important project, since the special climatic conditions in the desert required special material for the cable channel system which is resistant to UV and also remains permanently stable in direct sunlight and with extreme temperature fluctuations. The light weight of hanit was also an important decision-making criterion, since this made it possible for the cable channels to be imported in large quantities within a very short time with comparatively low transport costs. In total, we supplied 86,000 metres of cable channel made from hanit in 550 sea containers. Due to the light weight, on site processing can take place particularly quickly and easily. The expansion of plastic with the high temperature fluctuations in the desert was a challenge during the design of the project. However, we used our expertise to come up with an appropriate solution. Following a four year construction period, the cable channel system for the Metro lines was completed in 2019, and therefore a major project was completed to the complete satisfaction of our customer.
Our hanit recycled plastic was used on this large and important project, since the special climatic conditions in the desert required special material for the cable channel system which is resistant to UV and also remains permanently stable in direct sunlight and with extreme temperature fluctuations. The light weight of hanit was also an important decision-making criterion, since this made it possible for the cable channels to be imported in large quantities within a very short time with comparatively low transport costs. In total, we supplied 86,000 metres of cable channel made from hanit in 550 sea containers. Due to the light weight, on site processing can take place particularly quickly and easily. The expansion of plastic with the high temperature fluctuations in the desert was a challenge during the design of the project. However, we used our expertise to come up with an appropriate solution. Following a four year construction period, the cable channel system for the Metro lines was completed in 2019, and therefore a major project was completed to the complete satisfaction of our customer.
TECHNICAL DATA
Standard dimensions - special dimensions on request
Type 230
External dimensions
Width: 14 ¹¹∕₁₆"
Length: 40 ¹⁵∕₁₆"
Height: 8 ¹∕₁₆"
Internal dimensions
Width: 7 ⁵∕₈"
Length: 39 ³∕₈"
Height: 5 ⁵∕₁₆"
Weight: 37.5 lbs
Cover
Width: 9 ¹∕₁₆"
Length: 39 ³∕₈"
Height: 1 ⁹∕₁₆" / 1 ³∕₁₆"
Weight: 15.4 lbs
Laying dimension
Length: 39 ³∕₈"
Type 550
External dimensions
Width: 21 ⁵∕₈"
Length: 45 ¹∕₁₆"
Height: 15 ¹∕₄"
Internal dimensions
Width: 16 ⁹∕₁₆"
Length: 43 ⁵∕₁₆"
Height: 11 ¹³∕₁₆"
Weight: 77.2 lbs
Cover
Width: 21 ⁷∕₁₆"
Length: 44 ⁵∕₁₆"
Height: 1 ¹⁵∕₁₆"
Weight: 46.3 lbs
Laying dimension
Length: 43 ⁵∕₁₆"
YOUR CONTACTS
Get in touch
As an experienced project partner, we know that every project has its own complexity. Our hanit System experts would be pleased to take the time to analyze your requirements with you and find the best possible solution for your project. Just get in touch – we look forward to getting to know you.
Elizabeth Hueftlein
+1 519 2188800
Lizz.Hueftlein@hahnplastics.com
Our technical sales experts are also active on LinkedIn. Would you like to keep up to date on the topic of supply ducts or exchange ideas with our experts on this topic? Network now and never miss any news again.
Would you like to receive more information about this product or make an appointment for a consultation? Then simply use our contact form. Our experts will usually get back to you within 24 hours on weekdays.